RC Hobby RC Hobby Contact USMon compteVoir panierCommander  
  
Accueil » Catalogue » Voitures » Variateurs électroniques - ESC » 25A 2A BEC For 1/10 to 1/18 RC car
Mon compte  |  Voir panier  |  Commander   
Catégories
Avions
Helico
Bateaux
Voitures
  Roues - jantes
  Moteurs
  Reffroidisseurs
  Accessoires
  Pinions moteur
  Variateurs électroniques - ESC
  Modèles ARTR
  Modéles RTR
Autres
Fin de séries
Occasions
Coin des amis
Nouveaux produits
Offres spéciales
Go to..
Recherche rapide
 

Recherche avancée
Fabricants
Nouveautés ? plus
1/8 Plastic Rubber Tires & Wheels  (2 x 1 pair)
1/8 Plastic Rubber Tires & Wheels (2 x 1 pair)
39.00CHF
Informations
Conditions d'utilisation
Contactez-nous
25A 2A BEC For 1/10 to 1/18 RC car Stock Livrable de suite. Disponible au magasin
50.00CHF
25A 2A BEC For 1/10 to 1/18 RC car
Cliquer pour agrandir

Features / Specifications: 1. These types of speed controllers especially designed to offer high power and high efficiency combined with low weight and compact dimensions. 2. Automatic cut off and auto detection of all types and number of cells. 3. Perfect design for direct drive applications. The motor will respond to throttle input & accelerate instantly. There is no immediate cut-off power when the voltage drops, instead, the power to the motor will be gradually reduced as the battery loses its charge, providing enough time to safely drive termination or stop the model. When the battery voltage drops below 65% of its full charge capacity, the power to the model will be cut-off. 4. Driving forwards the braking will be actuated by reversing throttle direction while driving forwards. Interval or spot braking can always be controlled perfectly while driving forwards except when the driving speed drops to certain low level or slip driving happens, which will then reverse to drive backwards after reversing the throttle direction. 5. Driving backwards the braking will be actuated by reversing throttle direction while driving backwards. By reversing throttle direction during driving backwards, it will get only a brief braking action & then reverse to drive forwards instantly. The speed of driving backwards will be responded proportionally to the throttle input. 6. Over temperature protection - Motor to be intermittently turned off when the temperature reaches around 105° centigrade. 7. Fail safe mode - once there is any abnormal signal or signal fail between transmitter & receiver, being detected for about 2 seconds, the controller will cut off the motor power automatically. Once the signals get back to normal, the system will auto-turn on again. 8. Specifications 8.1 Input voltage : 6V ~ 16.8V DC 8.2 Output : 25A, Peak 30A 10 Sec 8.3 BEC : 5V 2A 8.4 Weight : 31g 8.5 Dimension : 41 x 25 x 10 mm

Ce produit a été ajouté à notre catalogue le vendredi 01 octobre, 2010.
Critiques
Panier plus
vide
Langues
Français Anglais Allemand
Information fabricant
Autres articles
Notifications plus
NotificationsMe prévenir des mises à jour de 25A 2A BEC For 1/10 to 1/18 RC car
Faire connaître
 
Envoyer cet article à un ami(e).
Paiement en ligne

Devises

Copyright © 2010 - RC Hobby by Swissmedia66
+41(0)79.964.03.61 - info@rchobby.ch